The Dobinsons Nitro Gas Lift Kit for the Suzuki Jimny JB74 (2019-On) pairs twin-tube nitrogen gas shocks with vehicle-specific coil springs to deliver a 2" lift front and rear. Australian valving tuned for the Jimny's short wheelbase improves articulation and ride quality over corrugations, while the raised coil springs restore correct ride height for bigger tyres and bar work. This complete 4WD lift kit is dispatched from Australian stock with manufacturer warranty and fitment support from our team. Every component is matched front-to-rear so you're not guessing on spring rates or shock valving.
Browse all compatible suspension parts for your Suzuki Jimny 2019-On using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Suzuki | Jimny | JB74 | 2019-On | 1.5L K15B Petrol |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
The Jimny's stock coil springs are set for a lightly loaded vehicle, so this kit's raised springs are matched to typical accessory loads like a bull bar, winch and roof rack rather than heavy constant weight. If you're running a roof-top tent, drawer system or heavier bar work, tell our team what you're carrying before ordering so we can confirm the spring is right for your build. Common accessories that affect front spring selection include bull bars and winches; rear-loaded items like drawers, fridges and long-range fuel tanks affect the rear.
Fitment is a bolt-in job for an experienced DIY installer with basic hand tools, or a straightforward job for any workshop familiar with 4WD suspension. A wheel alignment is mandatory after installation to correct camber and toe at the new ride height. Allow a 500km break-in period for the springs and shock seals to settle before fine-tuning tyre pressures and alignment. These vehicles use a solid front axle on coil springs, located by radius arms and a panhard rod rather than IFS control arms, so geometry correction at lift height comes from caster-correction radius arm bushes or adjustable radius arms plus an adjustable panhard rod.
Dobinsons has manufactured 4WD suspension in Australia and overseas for more than 60 years, with valving developed and tested on local roads and tracks. Every Nitro Gas kit is backed by a manufacturer warranty and dispatched from our Australian stock, so you're not waiting on overseas freight. Tourers and Jimny owners building a weekend rig both rely on the brand for a straightforward, well-documented upgrade — view the full Dobinsons range for other Jimny-compatible components.
This kit suits Jimny owners fitting a bull bar, winch or bigger tyres who want the ride height and clearance to match, along with weekend tourers wanting better wheel travel on rough tracks. If you're carrying variable loads such as camping gear that comes and goes, it's worth also looking at airbag suspension to fine-tune rear height under load.
Ready to fit this kit to your Jimny? Order online for fast Australia-wide dispatch, or contact our team for fitment advice before you buy. Browse our full lift kit range for other Jimny and 4WD suspension options.
Planning a Jimny lift? Read our guide to common Jimny suspension problems and fixes.
This Dobinsons Nitro Gas Lift Kit is built specifically for the Suzuki Jimny JB74, sold in Australia from 2019 onward. It is not designed for the earlier JB43 Jimny models. If you're unsure which generation you have, our team can confirm fitment from your VIN or compliance plate before you order.
This kit provides a 2" (50mm) lift front and rear over standard Jimny JB74 ride height, using raised coil springs matched to the Nitro Gas shock valving.
Please note that all assembled struts are dispatched at a height based on our experience and the manufacturer’s specifications for the advertised lift. Coil springs and leaf springs are also manufactured according to the advertised height and constant-load rating. Actual vehicle height may vary depending on the vehicle and the weight of fitted accessories. Further adjustment may therefore be required after installation. The installer may use coil spacers or adjust the struts at their discretion to achieve the desired height. We are not responsible for vehicle-specific height variations or any additional adjustments required after installation.
This vehicle runs a solid front axle on coil springs, located by radius arms and a panhard rod, so there are no upper or lower control arms to upgrade like an IFS vehicle. At around 2" of lift most vehicles run the kit as supplied; taller lifts benefit from caster correction (offset radius arm bushes or adjustable radius arms) to restore steering self-centring, plus an adjustable panhard rod to re-centre the axle. Our team can advise what your lift height and build need.
The Jimny is not rated for heavy towing, so this kit is set up for accessory load such as a bull bar, winch and roof rack rather than caravan towing duty. If you're regularly carrying gear or a small trailer, tell us your load setup so we can confirm the spring rate is appropriate. For variable loads, pairing with airbag suspension can help maintain rear ride height.
This vehicle runs a solid front axle on coil springs, located by radius arms and a panhard rod, so there are no upper or lower control arms to upgrade like an IFS vehicle. At around 2" of lift most vehicles run the kit as supplied; taller lifts benefit from caster correction (offset radius arm bushes or adjustable radius arms) to restore steering self-centring, plus an adjustable panhard rod to re-centre the axle. Our team can advise what your lift height and build need.
Yes, a wheel alignment is mandatory after installing this kit. Ride height changes affect camber and toe, and correct alignment protects tyre wear and keeps steering predictable. We recommend booking an alignment straight after fitment and again after the 500km break-in period.
Dobinsons offers coil springs matched to typical Jimny accessory loads rather than a wide range of load-rated options like larger 4WDs. If you're carrying heavier gear such as drawers or a rooftop tent, let our team know your setup so we can confirm whether this spring or an alternative Dobinsons option suits your load better.
The 2" lift front and rear creates clearance for a moderate increase in tyre diameter over stock. Exact tyre size depends on your wheel offset and whether you've also fitted flares or trimmed guards. Our fitment team can advise on a safe maximum tyre size for your specific Jimny setup.
This kit is backed by a Dobinsons manufacturer warranty covering the Nitro Gas shocks and coil springs against manufacturing defects. Warranty terms are handled through 4WD Suspension as your Australian point of contact, so you're not dealing with an overseas supplier directly. Keep your proof of purchase and fitment date for any warranty claim.
Yes, the Nitro Gas twin-tube shocks are tuned to keep the Jimny comfortable and predictable on sealed roads, not just off-road tracks. Many owners run this kit as their everyday setup while still getting the benefit of extra clearance for weekend touring. On-road manners are close to standard, with the main difference being the raised ride height and improved bump absorption.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
