The Dobinsons Nitro Gas Quick Lift Kit for Toyota Hilux N80 2015-ON delivers proven twin-tube nitrogen gas performance with pre-assembled front struts for fast, hassle-free installation. Engineered and tested in Australia by Dobinsons' in-house suspension design team, this premium lift kit combines raised coil springs, extended shackles, and vehicle-specific valving to handle everything from daily commutes to remote outback touring. Backed by premium NOK seals, Fuchs German oil, and rigorous Australian durability testing, this kit is in stock now with fast dispatch across Australia.
Browse all compatible suspension parts for your Quick Lift Kit Suits - Toyota Hilux using our parts finder.
| Make | Model | Series | Years | Configuration |
|---|---|---|---|---|
| Toyota | Hilux | N80 | 2015-2024 | All variants (SR, SR5, Rogue, Rugged, Rugged X) |
| Toyota | Hilux | N80 | 2015-2024 | Single Cab, Extra Cab, Dual Cab |
| Toyota | Hilux | N80 | 2015-2024 | 2WD & 4WD (IFS Front Suspension) |
Not sure if this fits your vehicle? Use our Toyota Hilux N80 parts finder or contact our suspension experts for personalised fitment advice.
Selecting the correct spring rate is critical for optimal ride quality and component longevity. Choose your spring rate based on the constant load you carry — this means accessories and equipment permanently fitted to your vehicle, not occasional loads like camping gear or boat trailers. Common constant front loads include bull bars, winches, steel or alloy trays, long-range fuel tanks, and canopies. Rear constant loads typically include drawer systems, dual battery setups, water tanks, toolboxes, and permanently mounted camping equipment. Occasional loads such as passengers, cargo, or towing should not be factored into your spring rate selection, as over-specification will result in harsh ride quality when unladen and may accelerate wear on other suspension components.
This Dobinsons Nitro Gas Quick Lift Kit is designed for professional installation or experienced DIY mechanics with appropriate workshop equipment. Pre-assembled front struts significantly reduce installation time compared to traditional spring compressor methods. A four-wheel alignment is mandatory after installation to ensure correct camber, caster, and toe settings for optimal tyre wear and handling. We recommend a 500km break-in period during which springs will settle and suspension components will bed in — avoid extreme off-road use during this time. For vehicles with heavy bull bars or significant accessory loads, consider pairing this kit with upgraded control arms to correct suspension geometry and restore factory ride height under load.
With over 60 years of Australian manufacturing heritage, Dobinsons Spring & Suspension has earned its reputation as one of Australia's most trusted 4WD suspension brands. Every Dobinsons shock absorber is designed and tested in-house by qualified suspension engineers using state-of-the-art dyno testing and custom-built durability machines that simulate millions of cycles in extreme conditions. From the blistering heat and corrugations of the Simpson Desert to the freezing mud of Victorian high country, Dobinsons components are proven in the harshest Australian environments. Exported to over 40 countries worldwide, Dobinsons suspension is backed by comprehensive warranty coverage and is the choice of professional tourers, grey nomads, and commercial fleet operators across Australia.
The Dobinsons Nitro Gas Quick Lift Kit is ideal for Toyota Hilux N80 owners who need a reliable balance between on-road comfort, off-road capability, and load-carrying performance. It's perfect for tradespeople running canopies and toolboxes, weekend adventurers heading bush with camping gear, and grey nomad tourers towing caravans around Australia. If you regularly carry heavy loads or tow at maximum capacity, consider supplementing this kit with airbag suspension to maintain ride height and improve stability without over-specifying your spring rates. This kit suits drivers who want genuine Australian engineering quality without the complexity or cost of adjustable remote reservoir systems.
Ready to upgrade your Toyota Hilux N80 suspension? This Dobinsons Nitro Gas Quick Lift Kit is in stock now at our Australian warehouse with fast dispatch to all states and territories. Our suspension specialists are here to help you select the right spring rates and answer any fitment questions. For more heavy-duty options or alternative vehicle models, browse our complete range of 4WD lift kits or reach out to our team for expert advice.
This kit is specifically engineered for Toyota Hilux N80 models manufactured from 2015 onwards, covering all variants including SR, SR5, Rogue, Rugged, and Rugged X in both 2WD and 4WD configurations. It fits single cab, extra cab, and dual cab body styles with IFS (Independent Front Suspension). The kit is a direct bolt-in replacement requiring no modifications to your vehicle. If you're unsure about your specific model year or variant, use our online parts finder or contact our suspension experts for confirmation before ordering.
This Dobinsons Nitro Gas Quick Lift Kit typically provides approximately 40-50mm of front lift and 40-50mm of rear lift, depending on your vehicle's current accessory load and spring rate selection. Actual lift height will vary based on the weight of permanently fitted accessories like bull bars, winches, canopies, and drawer systems. The raised coil springs and extended shackles are designed to restore factory ride height when accessories are fitted, or provide a moderate lift for unladen vehicles. Final ride height will settle after the initial 500km break-in period as springs compress and components bed in.
This comprehensive kit includes 2 x Dobinsons Nitro Gas pre-assembled front struts (with raised coil springs and top mounts already installed), 2 x Dobinsons Nitro Gas rear shock absorbers, 2 x extended rear shackles, and all necessary mounting hardware and bushings. The pre-assembled front struts significantly reduce installation time as the coil springs are already safely compressed and fitted to the struts at the factory. All components are vehicle-specific for the Toyota Hilux N80 and engineered to work together as a complete suspension system. Professional installation and wheel alignment are required but not included in the kit price.
Yes, this Dobinsons Nitro Gas Quick Lift Kit is well-suited for towing applications thanks to its firmer valving and vehicle-specific spring rates that maintain control under load. The twin-tube nitrogen gas shock absorbers feature larger body sizes with increased oil capacity for reduced shock fade during extended highway towing. However, when selecting your spring rates, remember that occasional towing should not be considered when choosing constant load ratings — only permanently fitted accessories count. For regular heavy towing or caravan touring, many Hilux owners pair this kit with supplementary airbag suspension in the rear for additional load support and the ability to adjust ride height when hitched.
Control arm upgrades are not mandatory for this moderate lift kit, but they are recommended if you're carrying heavy front-end loads like steel bull bars, winches, and long-range fuel tanks. The 40-50mm lift provided by this Dobinsons kit will alter your front suspension geometry slightly, and aftermarket upper control arms with additional castor correction can restore optimal wheel alignment and improve handling. Most Hilux N80 owners running standard accessories will be fine with the factory control arms and a proper four-wheel alignment after installation. If you experience premature tyre wear or poor steering feel after fitment, consider upgrading to aftermarket control arms for improved geometry correction.
Yes, a professional four-wheel alignment is absolutely mandatory after installing any lift kit, including this Dobinsons Nitro Gas Quick Lift Kit. Changing your suspension height alters critical alignment angles including camber, caster, and toe settings, which directly affect tyre wear, steering feel, and vehicle stability. Driving your Hilux N80 without a post-installation alignment will cause accelerated and uneven tyre wear, pulling to one side, and potentially dangerous handling characteristics. Budget for a four-wheel alignment at a reputable suspension workshop immediately after installation. Most alignment shops recommend re-checking alignment settings after the initial 500km break-in period once springs have fully settled.
Yes, when ordering this Dobinsons Nitro Gas Quick Lift Kit you must select appropriate spring rates for both front and rear based on your constant accessory load. Dobinsons offers multiple spring rate options to match different load configurations — light, medium, and heavy constant loads. It's critical to select spring rates honestly based only on permanently fitted accessories, not occasional loads like camping gear or towing. Over-specifying spring rates will result in an uncomfortably harsh ride when unladen and can accelerate wear on other suspension components. If you're unsure which spring rates suit your specific setup, contact our suspension specialists who can recommend the optimal combination for your front bull bar, canopy, and drawer system configuration.
This Dobinsons Nitro Gas Quick Lift Kit providing 40-50mm of lift will accommodate moderately larger tyres on your Toyota Hilux N80, typically up to 32-33 inches depending on wheel offset and tyre width. The exact tyre size you can fit will depend on your specific wheel and tyre combination, as well as whether you're willing to accept minor rubbing during full lock or compression. Most Hilux N80 owners running this lift comfortably fit 265/70R17 or 265/65R18 tyres without rubbing issues. For larger tyres in the 33-35 inch range, you may need additional modifications such as diff drops, body lifts, or trimming of guard liners. Always test-fit new tyres at full lock and compression before heading off-road.
Dobinsons Spring & Suspension backs this Nitro Gas Quick Lift Kit with a comprehensive manufacturer's warranty covering defects in materials and workmanship. Warranty periods vary by component — shock absorbers and struts typically carry 12-24 months warranty depending on application, while coil springs are covered for extended periods. Warranty coverage requires professional installation with proof of purchase, and claims must be processed through your original retailer. The warranty does not cover normal wear and tear, damage from accidents or misuse, or components damaged by incorrect installation or lack of proper vehicle alignment. For specific warranty terms applicable to your purchase, contact us at time of order or refer to the warranty documentation included with your kit.
Absolutely — this Dobinsons Nitro Gas Quick Lift Kit is engineered to deliver excellent on-road comfort and highway manners while providing genuine off-road capability when needed. The twin-tube nitrogen gas shock absorbers feature vehicle-specific valving tuned for the Toyota Hilux N80's weight distribution, providing a comfortable ride for daily commuting and highway cruising without the harsh feel of competition-spec suspension. Natural rubber bushings reduce noise, vibration, and harshness, while the larger shock body sizes with increased oil capacity maintain consistent damping even during extended highway runs. This kit is ideal for Hilux owners who drive predominantly on sealed roads but want the confidence and capability for weekend off-road adventures, beach driving, or touring on corrugated outback tracks.
Perfect Upgrade for Our Family Adventures
Fitted this Dobinsons lift kit to our Hilux before our last trip down to Wilsons Prom and the difference was immediately noticeable. The ride quality is so much better than stock, especially when we're loaded up with the camper trailer and all the family gear. Really happy with the extra clearance on beach tracks too, and the Nitro Gas shocks handle corrugations like a dream.(5)
Sorted for the Tanami and Beyond
Been running this Dobinsons quick lift kit on my N80 for about 18 months now through the Simpson, Tanami, and plenty of corrugated station tracks. The ride quality is genuinely impressive – it soaks up the washboard stuff way better than the previous kit I had, and there's no wallowing when loaded up with camp gear and water. Fitment was spot-on and the height is perfect for the 33s I wanted to run without rubbing. Highly recommend for anyone doing serious remote touring.(5)
Perfect Upgrade for Family Adventure Trips
Fitted this Dobinsons quick lift kit to my 2017 Hilux a few months back and it's transformed our weekend camping trips down the coast and out bush. The ride quality is noticeably better than stock, especially when we're loaded up with the camper trailer and all the family gear. Installation was straightforward and the height increase gives us that extra clearance we needed for beach tracks without making it a handful around town.(5)
Perfect for Daily Work and Weekend Trips
Been running this Dobinsons lift kit on my Hilux for about 6 months now, carting tools and materials around Melbourne all week then hitting the high country on weekends. The ride quality is heaps better than the standard setup, even with a full load in the tray. Installation was straightforward and the height is spot on for what I needed without going overboard.(5)
Perfect Upgrade for Our Family Adventures
Fitted this Dobinsons lift kit to our Hilux before our last trip to the High Country and couldn't be happier with how it handled the corrugations and rocky tracks. The kids even commented on how much smoother the ride was compared to the stock suspension, especially when we were loaded up with camping gear and water. Installation was straightforward and the quality of the components is top-notch – you can tell these are built to last in proper Aussie conditions.(5)