Toughdog Front Coil Springs for the Suzuki Jimny (pre-2017) are supplied as a matched pair and lift front ride height by up to 2" while adding load support for bullbars, winches and driving lights. Made by Toughdog, an established Australian suspension manufacturer, these heavy-duty coil springs suit weekend tourers and daily commuters running the Jimny SN413. Check all suspension parts for the Suzuki Jimny using our parts finder. Backed by a Toughdog manufacturer warranty, in stock now with fast Australia-wide dispatch and fitment support from our team.
Browse all compatible suspension parts for your Front Coil Springs Suzuki Jimny Pre 2017 using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Suzuki | Jimny | SN413 | 1998-2017 | 1.3L G13BB petrol |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
Choosing the right front spring rate depends on what's permanently fitted to the front of your Jimny. A steel bullbar, winch and auxiliary driving lights add constant weight that a factory-rate spring wasn't designed to carry, so a heavier-rate spring like this Toughdog unit keeps ride height consistent instead of sagging over time. Common front-end accessories that affect spring selection include steel or alloy bullbars, winches, driving light bars and snorkels; if your Jimny is running light with no bullbar or winch, talk to our team before ordering to confirm this is the right rate for your setup.
These springs are a direct bolt-in replacement for the factory front coil and can be fitted by an experienced DIY installer with a spring compressor, though we recommend a qualified 4WD suspension workshop for correct preload and strut alignment. A wheel alignment is mandatory after fitting to reset camber and caster for the new ride height and to protect tyre wear. Allow a 500km bed-in period for the springs to settle to their final rate before fine-tuning ride height. Because raising the front changes suspension geometry, it's worth pairing this upgrade with control arm upgrades to correct CV and steering angles at the new height.
Toughdog has supplied 4WD suspension to the Australian market for decades, developing springs and shocks tested on local roads and tracks rather than adapted from an overseas specification. Every coil spring is backed by a manufacturer warranty, and the brand is used by tradespeople, grey nomads and weekend tourers who need consistent ride height under load. View the full Toughdog range for matching shocks and rear springs for your Jimny.
This spring suits Jimny owners running a front bullbar, winch or light bar who've noticed the nose sitting low, plus anyone wanting extra front clearance for tracks and beach access. If you're carrying variable loads rather than a fixed accessory weight — camping gear that comes and goes, for example — airbag suspension can complement a coil spring by giving you load-levelling on demand.
Toughdog Front Coil Springs for the Suzuki Jimny pre-2017 are in stock at our Australian warehouse with fast dispatch and fitment support from our suspension team. Browse our full lift kit range for a matched shock and spring package, or get in touch if you need help picking the right spring rate for your Jimny.
Yes, this Toughdog spring is designed for the Suzuki Jimny SN413 built before 2017, fitted to the front axle only. It's a direct bolt-in replacement for the factory front coil spring, so no cutting or drilling is needed. If you're unsure which generation your Jimny is, our team can confirm fitment from your rego or VIN. Check our Jimny parts finder to browse everything listed against your exact model.
This spring gives up to 2" of front lift over the factory ride height. The exact figure on your Jimny depends on the vehicle's weight, any accessories already fitted, and whether it's paired with a matching rear spring. We recommend measuring your current ride height before and after fitment so you know your actual result.
You get 2 x Toughdog front coil springs, supplied as a matched pair for the Jimny's front axle. Rear coil springs, shock absorbers and control arms are not included and are sold separately. This keeps the kit affordable if you only need to address a low or sagging front end.
This is a front spring, so it primarily supports weight added to the nose of the Jimny — bullbars, winches and driving lights — rather than trailer towing, which loads the rear. If you're towing regularly, look at a matched rear leaf or coil upgrade from our leaf springs and coil springs ranges to address rear sag. Speak with our team about a front and rear combination if you're carrying a heavier load overall.
Not always at this lift height, but it's worth checking. Raising the front by up to 2" alters suspension geometry slightly, which can affect steering feel and CV joint angles on some Jimny setups. Many owners pair this spring with upgraded control arms to correct geometry properly, and our team can advise based on your specific use case.
Yes, a wheel alignment is mandatory after installing these front springs. Changing ride height alters camber and caster, and skipping the alignment leads to uneven tyre wear and can affect steering feel. We recommend booking an alignment straight after fitment, before the vehicle covers any significant distance.
Toughdog produces its Jimny front springs in different rates to suit varying accessory loads, from standard-rate to this heavy-duty option. If you're running a heavy bullbar and winch, this heavy-duty spring is the better match; if your front end is close to stock weight, a standard-rate spring may ride better. Contact our team with details of what's fitted to your Jimny and we'll confirm the right rate for you.
A front lift of up to 2" can create some extra clearance, but tyre fitment also depends on your wheel offset, tyre width and guard trimming. We recommend checking against your specific tyre size before buying, and our team can talk you through realistic tyre options for a Jimny running this spring. Some owners combine this front spring with a matching rear spring to keep the stance level before stepping up tyre size.
This spring is backed by a Toughdog manufacturer warranty covering defects in materials and workmanship. As warranty terms can be updated by the manufacturer, contact our team for the current warranty period applying to this coil spring before you order. We can also help with any warranty claims after purchase.
Yes. As a matched pair with a progressive spring rate, this Toughdog spring is designed to hold everyday load — like a bullbar or winch — without feeling stiff or unsettled around town. Most Jimny owners run this spring as their everyday setup and only notice the extra support when off-road or fully loaded. A correct wheel alignment after fitting keeps the daily ride comfortable and even.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
