The Dobinsons IMS Lift Kit suits the Dodge Ram 1500 DS and delivers a 3" front lift with a 2" rear lift using independent monotube shock absorbers front and rear. Heavy-duty coil springs and caster-correcting upper control arms restore front-end geometry at the new ride height, improving towing stability and payload control. Pair it with our coil spring range if you need a different rate for your accessory load. In stock in Australia with full manufacturer warranty and fitment support from our team.
Browse all compatible suspension parts for your Dodge Ram 1500 using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Dodge | Ram 1500 | DS | 2019-ON | 5.7L HEMI V8 (RHD) |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
Lift height compliance: Suspension lifts of this size may exceed your state's allowable limit without engineering certification. Check your state's light vehicle modification rules (VSB14/NCOP) before fitting.
Choosing the right spring rate comes down to what you're carrying day to day, not just occasional loads. Front rates should account for a winch, bull bar or aftermarket driving lights, while rear rates need to cover canopies, tool boxes, water tanks, dual batteries or constant caravan hitch weight. If you're unsure which rate suits your Ram 1500's setup, our team can walk through your accessory list and towing weights before you order.
This kit is best fitted by an experienced 4WD suspension installer or a competent DIYer with the right tools, given the coil spring compression and control arm work involved. A wheel alignment is mandatory after fitting to bring caster, camber and toe back within factory tolerance at the new ride height. Allow a 500km break-in period for the springs and shocks to settle before final alignment checks. Consider pairing this kit with control arm upgrades if you're running additional lift or larger tyres, as this helps maintain correct CV and steering angles.
Dobinsons has built its suspension range in Australia around real-world touring and towing demands, not just showroom fitment. Every IMS kit is backed by a manufacturer warranty and dispatched from local stock, with our team available to confirm spring rate and fitment before you buy. You can view the full Dobinsons range to see matching shocks, springs and control arms for other vehicles in your fleet.
This kit suits Ram 1500 DS owners who tow caravans, carry canopies and tool boxes for trade work, or run touring setups with dual batteries and long-range fuel. If your accessory load is more constant than occasional, it's worth comparing this coil-spring kit against airbag suspension options for extra load support at the rear.
Ready to order? This Dobinsons IMS kit is in stock in Australia for fast dispatch, with our team on hand for fitment advice — browse our full lift kit range to compare options for your Ram 1500.
New to Ram suspension? Read our guide to common Ram suspension problems and how to fix them.
This Dobinsons IMS Lift Kit is built specifically for the Dodge Ram 1500 DS series from 2019 onward, including RHD conversions sold in Australia. It's designed around the factory coil spring front and rear layout of the DS chassis. If your Ram 1500 has already had suspension modifications fitted, check with our team first to confirm compatibility. We can also confirm fitment through our parts finder for the Ram 1500.
This kit provides a 3" lift at the front and a 2" lift at the rear. The difference in front and rear lift is deliberate, matching the way the Ram 1500 DS sits when loaded with touring or towing accessories. Actual ride height can vary slightly depending on your vehicle's condition and accessory load.
Please note that all assembled struts are dispatched at a height based on our experience and the manufacturer’s specifications for the advertised lift. Coil springs and leaf springs are also manufactured according to the advertised height and constant-load rating. Actual vehicle height may vary depending on the vehicle and the weight of fitted accessories. Further adjustment may therefore be required after installation. The installer may use coil spacers or adjust the struts at their discretion to achieve the desired height. We are not responsible for vehicle-specific height variations or any additional adjustments required after installation.
The kit includes 2 front and 2 rear Dobinsons IMS monotube shock absorbers, matched front and rear heavy-duty coil springs, and 2 caster-correcting upper control arms. Mounting hardware and front bump stop spacers are also included. Lower control arms and a steering damper are not included and are sold separately if needed.
Yes, this kit is suited to towing setups. The heavy-duty rear coil springs help resist sag under hitch weight, and the IMS monotube rear shocks are designed to keep damping consistent when the vehicle is loaded. If your towing load is constant rather than occasional, talk to us about matching spring rate to your specific trailer or caravan weight.
Upper control arms are included in this kit specifically to correct caster angle at the new 3" front ride height. Lower control arms are not included and are only needed in some cases depending on final ride height and tyre size. Our team can advise whether lower arm upgrades are necessary for your setup.
Yes, a wheel alignment is mandatory after installing this kit. Raising the vehicle changes caster, camber and toe, and correct alignment is needed to protect tyre wear and steering feel. We recommend booking an alignment straight after fitment and again after the 500km break-in period.
Spring rate should be matched to your constant accessory load — items like bull bars, winches, canopies, tool boxes and dual battery trays all affect the right choice. Contact our team with your accessory list and typical towing weight so we can confirm the correct front and rear spring rate for your Ram 1500 before you order.
The 3" front and 2" rear lift from this kit creates additional clearance that generally allows for a larger tyre than standard, though exact clearance depends on wheel offset and tyre width. We recommend confirming your specific tyre size with our team before purchasing tyres, as clearance can vary with wheel choice.
This kit is covered by Dobinsons' manufacturer warranty, which applies to the shocks, springs and control arms supplied in the kit. Warranty terms are handled directly through us as an Australian-based supplier, so you're not dealing with an overseas claims process. Contact our team if you need the specific warranty period confirmed for your components.
Yes, this kit is designed to keep the Ram 1500 comfortable for daily driving while adding off-road and touring capability. The IMS monotube shocks are tuned to balance on-road control with the ability to carry a loaded rear end, so the vehicle doesn't feel harsh unladen. Many owners run this kit as their daily driver and tow or tour on weekends without changing components.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
